the aroma site

DIY LAVENDER PERFUME - the aroma site

The use of lavender essential oils in colognes and perfumes is a topic that many of our customers inquire about. Making your own distinctive aroma that won’t be overbearing is a very simple technique. By this blog I tell you about, DIY Lavender Perfume.

Hence, one of the first inquiries is: What distinguishes perfume from cologne? The easiest response is that up to 40% of essential oils can be found in a perfume. In general, the more essential oils a scent contains, the higher the price. A cologne, on the other hand, typically contains more alcohol and contains far less essential oil (only approximately 5%). The skin is additionally cooled by the alcohol, and the aroma is less intense.

Despite being one of the few essential oils that may be applied topically, we typically reserve the topical use of lavender for the treatment of burns and insect bites. If combined with a few additional fundamental ingredients, it becomes more elegant.

The basis of traditional perfumes is a carrier oil that is unscented. We advise jojoba oil for lavender because it is almost odorless. You might also try a very mild olive oil if you want a carrier that enhances and complements the lavender’s skin benefits. However, we advise staying away from olive oils with overpowering scents. If the fragrance profile doesn’t appeal to you, you can also use grapeseed or almond oil.

Three qualities are mentioned by fragrance creators as being present in a traditional essential oil aroma. Each of these is determined by the kind of bouquet that is initially detected, followed by what modifies this scent as the initial scent loses its dominance, and ultimately by what is a final and permanent scent imprint. “Notes” is the name for these fragrance components. The top note is the first, the middle or heart note is the second, and the base note is the last.

The top, middle, and base notes of a fragrance are often created by perfumiers using various kinds of essential oils. Yet, all three of these notes are present in the distilled oil when utilising Montebellaria essential oil. Our lavender oil’s top note is quite flowery and has unique lavender qualities. The middle note, which is either woodsy or herbal, is produced by distilling a small amount of the stem (or haulm) together with the flowers. Finally, a trace amount of naturally occurring camphor, which is similar to geranium or rosemary, makes up our base note. This simplifies things because you only need one kind of essential oil—rather than three—to create your aroma.
Hence, you can stick to this Diy lavender perfume.


• Jojoba Oil, 2 Tablespoons (of your choice)
• 60 drops of essential Monte-Bellaria lavender oil (about 3 milliliters)
• Wheat alcohol, 5 teaspoons (or non-flavored 100-proof vodka)

• Mt. Hydrosol, 2 Tablespoons (Distilled Flower Water)


  1. Directions To, Diy Lavender perfume. Put the M-B Lavender Essential Oil and Carrier Oil in a glass bottle with a tight-fitting screw lid.
  2. Shake for a few seconds and check the aroma to see if it is too strong (add more carrier oil) or too weak (shake again) (add more essential oil).
  3. Add the vodka, shake, and let the bottle sit for about a week with the cap on (but at least 2 days).
  4. Add the M-B hydrosol last and shake well to combine.
  5. Pour into your final perfume container—typically a class bottle that is dark or opaque and has a spray gun.
  6. The same methods apply when creating a cologne, with the addition of 3 tablespoons of M-B Solvent and 30 drops (1.5 ml) of M-B Lavender Essential Oil.


You can mix up the ratio of the essential oils you’re using because lavender blends well with practically any other essential oil aroma. The traditional recommended proportions are 25% top notes, 40% middle notes, and 35% base notes because certain oils are significantly stronger than others. Hope you understand how to, Diy lavender perfume.

Leave a Reply

Your email address will not be published. Required fields are marked *